Industrial diesel generator
DEUTZ 44 S Soundproofed · Diesel · EU Stage II
Diesel generator set with DEUTZ engine, 400/230 V, 50 Hz and ComAp IL4 AMF9 standard controller.
- PRP
- 40,0 kVA
- ESP
- 44,0 kVA
- Fuel
- Diesel
- Version
- Silent
Fit
Application and configuration of the generator set
Power, configuration, installation site, controller and accessories are key to the technical selection. German Generator supports configuration, transport coordination, commissioning and long-term spare parts supply.
Technical data
Output and equipment at a glance
Engine data
Alternator data
General data
Prime power (PRP): The power that the generating set can supply continuously with variable load for an unlimited number of hours per year, while observing the maintenance intervals specified by the manufacturer for the stated ambient conditions (according to ISO 8528-1). The average power delivered over a defined period and any overload must remain within the percentages specified by the manufacturer.
Standby power (ESP): The maximum power that the generating set can supply for a limited time while observing the maintenance intervals specified by the manufacturer for the stated ambient conditions according to ISO 8528-1. The number of hours per year is specified by the manufacturer. Overload is not permitted.
Note: All values are nominal values from the original technical datasheets of the engine and alternator. Values may change without notice and can vary by up to ±5%.
Control cabinet
ComAp IL4 AMF9 as standard controller
The ComAp InteliLite 4 AMF9 is a modern single-generator controller for standby and prime power applications. It controls, monitors and protects diesel and gas generator sets, supports automatic mains failure operation and is prepared for local operation, alarms, remote monitoring and flexible project configuration.
- Manual start, remote contact start and automatic start on mains failure
- Control for standby, island and prime power applications
- Backlit LCD display for operation and status indication
- Multimeter: mains and generator voltage L1/L2/L3/N, current L1/L2/L3, frequency and kVA
- Battery voltmeter, hour counter and periodic test function
- Detection and management of engine, generator and mains protection warnings
- 3 analogue inputs, 8 binary inputs and 8 binary outputs
- MODBUS, SNMP and USB communication for remote monitoring and integration
- Front panel protection rating IP65 for industrial environments
- Optionally expandable with 4G/GPS, Ethernet, RS232/RS485 and I/O modules
| Function / property | ComApIL4 AMF25 | ComApIG4 200 | ComApIG1000 | Deep SeaDSE7320 MKII | Deep SeaDSE8610 MKII | Deep SeaDSE8620 MKII |
|---|---|---|---|---|---|---|
| Automatic mains monitoring | ✔ | ✔ | ✔ | ✔ | Optional | ✔ |
| Manual / Remote Start | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 4G/GPS module | Optional | Optional | Optional | Optional | Optional | Optional |
| Generator synchronization | ✕ | ✔ | ✔ | ✕ | ✔ | ✔ |
| Automatic load sharing | ✕ | ✔ | ✔ | ✕ | ✔ | ✔ |
| Mains parallel operation | ✕ | ✔ | ✔ | ✕ | Optional | ✔ |
| USB | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| RS485 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| Ethernet (TCP/IP) | Optional | Optional | ✔ | ✕ | ✔ | ✔ |
| MODBUS RTU | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| SNMP | ✔ | ✔ | ✔ | ✕ | ✔ | ✔ |
| IP65 (front protection) | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Equipment
Generator set equipment
The equipment covers the structural and installation-relevant features of the diesel generator set. Depending on the model, these include the base frame, tank system, anti-vibration mounts, exhaust system and control panel.
Options
Optional equipment for installation and operation
Optional equipment allows installation, operation, noise control, tank capacity and monitoring to be adapted to the specific site.
Standards & testing
Documented quality before delivery
Quality is documented before every delivery. We work closely with selected manufacturing partners who maintain high standards in design, workmanship and quality control. From component selection to final assembly, each generator set undergoes thorough inspections to support performance, safety and long-term reliability.
Our European supplier network is built on decades of experience in power generation. This foundation stands for quality, technical expertise and precision throughout the manufacturing process.
High quality standards for every unit: All generator sets are comprehensively tested according to the manufacturer's specifications. Protection functions and control systems are fully simulated and validated before delivery.
Low Voltage Directive: 2014/35/EU
EMC Directive: 2014/30/EU
Noise directive: 2000/14/EC
Alternator: IEC EN 60034-1 / VDE 0530 / IEC 60034-1 / BS 4999-5000 / IEC34 / CSA-C22.2.
Inquiry
Prepare inquiry
The selected model is already included. Add your requirements regarding price, delivery time or technical specifications.
- Model and key data are carried over automatically.
- Price, availability and delivery time can be requested directly.
- Technical requirements can be added in the message field.
Download & comparison
Open datasheet or compare further generators
Verified technical answer
DEUTZ 44 S at a glance
DEUTZ 44 S is an industrial diesel generator with 40,0 kVA / 32,0 kW PRP and 44,0 kVA / 35,2 kW ESP. Final selection requires the project load profile, operating mode and site conditions.
| PRP output | 40,0 kVA / 32,0 kW |
|---|---|
| ESP output | 44,0 kVA / 35,2 kW |
| Voltage / frequency | 400/230 V / 50 Hz |
| Fuel | Diesel |
| Design | Soundproofed |
| Engine | DEUTZ BF4M2011 |
What is the difference between PRP and ESP?
PRP is the prime power rating for the defined operating profile; ESP is the emergency standby rating. They must not be treated as interchangeable continuous ratings.
What is checked before selection?
Load profile, motor starting currents, voltage, frequency, operating mode, site conditions, noise requirements and transfer concept.